Fluorescence Polarization Assays for Organic Compounds in Food Safety.

Elevated concentrations of toxic organic compounds observed in food products pose serious dangers to human health. Both natural and artificial pollutants can cause food contamination. The stages of food production, packaging, transportation, and storage can also largely cause the appearance of undesirable substances in food products. The health consequences of ingesting food containing toxic contaminants range from mild gastroenteritis to deaths resulting from dysfunctional internal organs and neurological syndromes. The World Health Organization (WHO) sets recommendations for the content of such chemicals in food, including a minimum allowable concentration considered safe for human consumption. However, the control of food products from chemical pollutants is necessary. Moreover, fast, sensitive, and inexpensive methods are needed to detect them at the point of need. Currently, immune analysis methods are most widely used to determine pollutants in food. The development of fluorescence polarization immunoassay (FPIA) methods in a competitive format is a powerful and modern tool for detecting organic molecules in various matrices, thereby making FPIA methods useful for food safety applications. Due to the availability of portable devices for measuring the fluorescence polarization signal, FPIA methods can be used at the point of need. The variety of fluorescent labels and recognizing elements (receptors, monoclonal and polyclonal antibodies, and nanobodies) permits fluorescence polarization (FP) assays to detect significantly lower limits of organic substances. The FP assay is a homogeneous, fast, and quantitative method. The development of various formats of FP assays makes them promising in determining food pollutants. This review summarizes publications on FP analyses for detecting organic contaminants (pesticides, hormones, toxins, antibiotics, and other pharmaceuticals) in food products during 2018-2023. Further, it demonstrates the prospects for using this method to determine pollutants at the point of need and for detecting high molecular weight substances, fungi, and bacterial infections during food safety inspections.

Accuracy of serological tests for bovine brucellosis: A systematic review and meta-analysis.

The direct methods for diagnosis of bovine brucellosis have several limitations, therefore serological tests are the basis for the diagnosis of the disease. However, a meta-analysis estimating the diagnostic sensitivity (DSe) and diagnostic specificity (DSp) on the main tests used in bovine brucellosis control programs worldwide has not been performed. This systematic review and meta-analysis aimed to estimate the DSe, DSp and thereby accuracy of serological tests individually used in the diagnosis of bovine brucellosis. The databases CABI, Cochrane Library, PubMed/MEDLINE, SciELO, Scopus and Web of Science were used to select articles. The search resulted in 5308 studies, of which 71 were selected for systematic review using quality assessment tools and 65 studies were included in the meta-analysis. For the meta-analysis, 178 assays and 11 different serological tests were considered. To estimate DSe and DSp of the tests, studies were divided according to animal selection for the studies: (1) studies that carried out a random or consecutive selection of participants (noncasecontrol studies) and (2) all studies, including casecontrol studies. Considering only the non-case-control studies to estimate the DSe, the tests that exhibited the best and worst performance were the iELISA test (indirect enzyme immunoassay - bacterial suspension as antigen - BS) (96.5%, 95% CI: 94.1-97.9%) and 2ME (2- mercaptoethanol test) (85.0%, 95% CI: 79.6-89.1%), respectively; while for DSp, the FPA (fluorescence polarization assay) (99, 7%, 95% CI: 99.5-99.8%) and PCFIA tests (protein concentration fluorescence immunoassay) (78.5%, 95% CI: 70.0-85.1%) showed better and worse performance, respectively. Overall, our results showed an overestimation in the DSe and DSp of the eleven serological tests assessed when casecontrol studies were included in the meta-analysis, which is a concern considering its impacts on the time and costs associated with populational diagnosis of the diseases, since several of these tests are routinely used in the control and eradication programs of bovine brucellosis worldwide. Furthermore, the tests that exhibited the best DSe and DSp, iELISA (BS) and FPA, respectively, are relatively easy to perform and interpret and the test which showed the best overall accuracy was FPA.

Detection of Dibutyl Phthalate in Surface Water by Fluorescence Polarization Immunoassay.

Dibutyl phthalate (DBP) is widely used as a plasticizer in the production of polymeric materials to give them flexibility, strength and extensibility. However, due to its negative impact on human health, in particular reproductive functions and fetal development, the content of DBP must be controlled in food and the environment. The present study aims to develop a sensitive, fast and simple fluorescence polarization immunoassay (FPIA) using monoclonal antibodies derived against DBP (MAb-DBP) for its detection in open waters. New conjugates of DBP with various fluorescein derivatives were obtained and characterized: 5-aminomethylfluorescein (AMF) and dichlorotriazinylaminofluorescein (DTAF). The advantages of using the DBP-AMF conjugate in the FPIA method are shown, the kinetics of binding of this chemical with antibodies are studied, the analysis is optimized, and the concentration of monoclonal antibodies is selected for sensitivity analysis-16 nM. The calibration dependence of the fluorescence polarization signal for the detection of DBP was obtained. The observed IC50 (DBP concentration at which a 50% decrease in the fluorescence polarization signal occurs, 40 ng/mL) and the limit of detection (LOD, 7.5 ng/mL) values were improved by a factor of 45 over the previously described FPIA using polyclonal antibodies. This technique was tested by the recovery method, and the high percentage of DBP discovery in water ranged from 85 to 110%. Using the developed method, real water samples from Lake Onega were tested, and a good correlation was shown between the results of the determination of DBP by the FPIA method and GC-MS. Thus, the FPIA method developed in this work can be used to determine DBP in open-water reservoirs.

Rapid determination of domoic acid in seafood by fluorescence polarization immunoassay using a portable analyzer.

Monitoring phycotoxin accumulation in marine products such as edible shellfish is a regulatory requirement in many countries. Therefore, a simple and rapid onsite quantification method is sought. Herein, we present a fluorescence polarization immunoassay (FPIA), a well-known one-step immunoassay, using a portable fluorescence polarization analyzer for domoic acid (DA), widely referred to as the primary toxin of amnesic shellfish poisoning (ASP). To establish FPIA for DA, the matrix effect of methanol, which is widely used to extract DA from shellfish, on FPIA was investigated. To validate this method, we performed a spike recovery test using oysters containing DA at a concentration equivalent to the regulatory limits of North America and the European Union (20 mg/kg). The recovery rate was found to be 79.4-114.7%, which is equivalent to that of the commercially available enzyme-linked immunosorbent assay (ELISA). We expect that this FPIA system will enable the quantitative onsite analysis of DA and significantly contribute to the safety of marine products.

BPA Endocrine Disruptor Detection at the Cutting Edge: FPIA and ELISA Immunoassays.

BPA is a chemical commonly used in the production of polymer-based materials that can have detrimental effects on the thyroid gland and impact human reproductive health. Various expensive methods, such as liquid and gas chromatography, have been suggested for detecting BPA. The fluorescence polarization immunoassay (FPIA) is an inexpensive and efficient homogeneous mix-and-read method that allows for high-throughput screening. FPIA offers high specificity and sensitivity and can be carried out in a single phase within a timeframe of 20-30 min. In this study, new tracer molecules were designed that linked the fluorescein fluorophore with and without a spacer to the bisphenol A moiety. To assess the influence of the C6 spacer on the sensitivity of an assay based on the respective antibody, hapten-protein conjugates were synthesized and assessed for performance in an ELISA setup, and this resulted in a highly sensitive assay with a detection limit of 0.05 g/L. The lowest limit of detection was reached by employing the spacer derivate in the FPIA and was 1.0 µg/L, working range from 2 to 155 µg/L. The validation of the methods was conducted using actual samples compared to LC-MS/MS, which served as the reference method. The FPIA and ELISA both demonstrated satisfactory concordance.

A Sensitive Fluorescence Polarization Immunoassay for the Rapid Detection of Okadaic Acid in Environmental Waters.

In this study, a homogeneous fluorescence polarization immunoassay (FPIA) for the detection of hazardous aquatic toxin okadaic acid (OA) contaminating environmental waters was for the first time developed. A conjugate of the analyte with a fluorophore based on a fluorescein derivative (tracer) was synthesized, and its interaction with specific anti-OA monoclonal antibodies (MAbs) was tested. A MAbs-tracer pair demonstrated highly affine immune binding (KD = 0.8 nM). Under optimal conditions, the limit of OA detection in the FPIA was 0.08 ng/mL (0.1 nM), and the working range of detectable concentrations was 0.4-72.5 ng/mL (0.5-90 nM). The developed FPIA was approbated for the determination of OA in real matrices: river water and seawater samples. No matrix effect of water was observed; therefore, no sample preparation was required before analysis. Due to this factor, the entire analytical procedure took less than 10 min. Using a compact portable fluorescence polarization analyzer enables the on-site testing of water samples. The developed analysis is very fast, easy to operate, and sensitive and can be extended to the determination of other aquatic toxins or low-molecular-weight water or food contaminants.

Dual-Wavelength Fluorescence Polarization Immunoassay for Simultaneous Detection of Sulfonamides and Antibacterial Synergists in Milk.

Combinations of sulfonamides (SAs) and antibacterial synergists (ASGs) are frequently used for treating infectious diseases and promoting growth for animals, which cause potential hazards to food safety and human health. To realize the simultaneous detection of SAs and ASGs in food, a homogeneous and high-throughput screening dual-wavelength fluorescence polarization immunoassay (DWFPIA) was developed. In this study, three SAs tracers and three ASGs tracers were synthesized by fluoresceins with different linkers and paired with their corresponding monoclonal antibodies (mAbs), respectively. To achieve a high sensitivity and broad specificity, the combination of tracers SADMPM-HDF with the longest linker paring mAb 10E6 for SAs and tracer HaptenA-DSCA paring mAb 9C9 for ASGs were chosen for the development of DWFPIA, achieving surprising IC50 values for 23 SAs below 100 µg L-1 and 5 ASGs below 50 µg L-1. The accuracy of DWFPIA was applied in real milk samples by typical sulfamethazine (SMZ) and trimethoprim (TMP), with recoveries of 81.7-97.2% and 78.6-103.6%, and coefficient of variations (CVs) below 18.9%, which could be completed within 15 min, including sample pretreatment. We firstly developed a simultaneous screening DWFPIA, covering all of the SAs and ASGs used in clinic and providing a great application potential in food safety analysis.

Fluorescence-polarization immunoassays within glass fiber micro-chambers enable tobramycin quantification in whole blood for therapeutic drug monitoring at the point of care.

Many therapeutic drugs require monitoring of their concentration in blood followed by dose adjustments in order to ensure efficacy while minimizing adverse effects. It would be highly desirable to perform such measurements rapidly and with reduced sample volumes to support point-of-care testing. Here, we demonstrate that the concentration of small therapeutics can be determined in whole blood within paper-like membranes using Fluorescence Polarization Immunoassay (FPIA). Different types of paper-like materials such as glass microfibers, cellulose and filter paper were investigated for artefacts such as scattering or autofluorescence. Accurate determination of the fluorescence polarization of red-emitting fluorophores at sub-nanomolar concentrations was feasible within glass fiber membranes. This enabled the development of a competitive immunoassay for the quantification of the antibiotic tobramycin using only 1 µL of plasma in glass fiber micro-chambers. Furthermore, the same membrane was used for transversal separation of blood cells followed by accurate FPIA read-out at the bottom part of the micro-chamber. For quantification of tobramycin, 1 µL of whole blood was incubated with the immunoassay reagents during only 3 min before deposition in the micro-chamber and analysis. Within the therapeutic window, coefficients of variation were around 20% and recoveries between 80 and 105%. Owing to the simplified procedure requiring no centrifugation, the reduced blood sample volume and the rapid analysis time, we envision that this novel method supports the performance of therapeutic drug monitoring directly at the point of care.

A simple and rapid homogeneous fluorescence polarization immunoassay for rapid identification of gutter cooking oil by detecting capsaicinoids.

In order to address the widespread concerns with food safety such as adulteration and forgery in the edible oil field, this study developed a fluorescence polarization immunoassay (FPIA) based on a monoclonal antibody in a homogeneous solution system for determination of capsaicinoids in gutter cooking oil by using chemically stable capsaicinoids as an adulteration marker. The prepared fluoresceinthiocarbamyl ethylenediamine (EDF) was coupled with capsaicinoid hapten C, and the synthesized tracer was purified by thin-layer chromatography (TLC) and showed good binding to the monoclonal antibody CPC Ab-D8. The effects of concentration of tracer and recognition components, type and pH of buffer and incubation time on the performance of FPIA were studied. The linear range (IC20 to IC80) was 3.97-97.99 ng/mL, and the half maximal inhibitory concentration (IC50) was 19.73 ng/mL, and the limit of detection (LOD) was 1.56 ng/mL. The recovery rates of corn germ oil, soybean oil and peanut blend oil were in the range of 94.7-132.3%. The experimental results showed that the fluorescence polarization detection system could realize the rapid detection of capsaicinoids, and had the potential to realize on-site identification of gutter cooking oil. As a universal monoclonal antibody, CPC Ab-D8 can also specifically identify capsaicin and dihydrocapsaicin, so the proposed method can be used to quickly monitor for the presence of gutter cooking oil in normal cooking oil.

Non-competitive fluorescence polarization immunosensing for CD9 detection using a peptide as a tracer.

This paper is the first report of a non-competitive fluorescence polarization immunoassay (NC-FPIA) using a peptide as a tracer. The NC-FPIA can easily and quickly quantify the target after simply mixing them together. This feature is desirable for point-of-need applications such as clinical diagnostics, infectious disease screening, on-site analysis for food safety, etc. In this study, the NC-FPIA was applied to detect CD9, which is one of the exosome markers. We succeeded in detecting not only CD9 but also CD9 expressing exosomes derived from HeLa cells. This method can be applied to various targets if a tracer for the target can be prepared, and expectations are high for its future uses.

Development of a sensitive and rapid fluorescence polarization immunoassay for high throughput screening eight glucocorticoids in beef.

In this study, a sensitive, rapid, homogeneous, and high-throughput fluorescence polarization immunoassay (FPIA) for the rapid screening of eight glucocorticoids (GCs) in beef samples was successfully established. Two tracers including 5-aminofluorescein-labeled dexamethasone (5-AF-DMS) and fluorescein isothiocyanate-labeled dexamethasone (FITC-DMS) were studied to select appropriate antibody-tracer pairs using four previously produced broad-specific monoclonal antibodies. An optimal combination of the antibody 12D9 and the tracer FITC-DMS was selected. Under optimal detection conditions, the half inhibitory concentrations of dexamethasone (DMS), betamethasone (BMS), prednisolone (PNS), hydrocortisone (HCS), beclomethasone (BCMS), cortisone (CS), 6-α-methylprednisone (6-α-MPNS), fludrocortisone acetate (HFCS) were 1.00, 2.17, 3.49, 12.45, 1.20, 5.66, 6.85 and 3.45 ng/mL, respectively. The average recoveries of the proposed method in beef samples ranged from 77.3-91.7% with the coefficient of variation less than 12%. The developed FPIA was time-saving that could be completed within 10 min. The FPIA was applied to beef samples and showed a good correlation with liquid chromatography-tandem mass spectrometry (LC-MS/MS) (R2 = 0.9894). Thus, the proposed method provides a rapid, reliable, sensitive, and high-throughput screening tool for the simultaneous screening of eight GCs in beef, which shows great potential in the food safety analysis.

Comparative evaluation of assays for IgM detection of rubella and measles infections / Evaluación comparativa de ensayos para la detección de IgM en infecciones por rubéola y sarampión

BackgroundSerological diagnosis of infections due to measles and rubella viruses is done by IgM detection. The aim of this study was to comparatively evaluate commercial systems for detecting IgM against both viruses, including those of ELISA, in indirect and capture formats, chemiluminescence and electrochemiluminescence.MethodsSeven (for rubella) and six (for measles) assays were studied. One hundred and sixty two samples were included in the study (from 90 rubella and 72 measles cases), and all were analyzed in all the assays.ResultsThe ranges of sensitivity, specificity and agreement for rubella were 94.8–100%, 52.4–100% and 75.5–98.1%, respectively. The corresponding ranges for measles assays were 87.0–100%, 53.3–100%, and 73.0–99.4%.ConclusionThe best-performing assays were chemiluminescence (for measles and rubella IgM), and electrochemiluminescence (for rubella IgM).

El diagnóstico serológico de las infecciones por los virus de la rubéola y del sarampión se realiza por detección de IgM específica. El objetivo de este estudio fue evaluar comparativamente sistemas comerciales para la detección de IgM frente a ambos virus, incluyendo ensayos de ELISA, tanto con metodologías indirectas como de captura, así como quimioluminiscencia y electroquimioluminiscencia.MétodosSe estudiaron 7 ensayos para rubéola y 6 para sarampión. Se emplearon 162 muestras (de 90 casos de rubéola y de 72 de sarampión) que se analizaron en todos los ensayos.ResultadosLos rangos de sensibilidad, especificidad y concordancia para los ensayos de rubéola fueron 94,8-100%, 52,4-100% y 75,5-98,1%, respectivamente. Los rangos correspondientes para los ensayos de sarampión fueron 87-100%, 53,3-100% y 73-99,4%, respectivamente.ConclusiónLos mejores ensayos fueron quimioluminiscencia (para IgM frente a rubéola y a sarampión) y electroquimioluminiscencia (para IgM frente a rubéola).

Fluorescence Polarization Immunoassay of Human Lactoferrin in Milk Using Small Single-Domain Antibodies.

Due to its unique structure and properties, human breast milk lactoferrin (hLF) has many nutritional and health-promoting functions in infants, including protection against inflammation and bacterial infections. The lack of LF in breastmilk or formula can result in the weakening of the infant's immune system. Noncompetitive polarization fluorescence immunoassay (FPIA) is a promising method for hLF quantification in milk and dairy products, which does not require the separation of the bound and free protein and allows to avoid time-consuming sample preparation. The use of fluorescently labeled single-domain camelid antibodies (nanobodies) for protein recognition in FPIA makes it possible to quantify relatively large antigens, in particular, hLF. In this work, we used previously obtained fluorescein isothiocyanate (FITC)-conjugated anti-hLF5 and anti-hLF16 nanobodies, which selectively recognized two different human lactoferrin epitopes, but did not bind to goat lactoferrin. The kinetics of hLF interaction with the FITC-labeled nanobodies was studied. The dissociation constant (KD) for the anti-LF5 and antiLF16 nanobodies was 3.2 ± 0.3 and 4.9 ± 0.4 nM, respectively, indicating the high-affinity binding of these nanobodies to hLF. We developed the FPIA protocol and determined the concentration of FITC-labeled anti-hLF5 and anti-hLF16 nanobodies that provided the optimal fluorescence signal and stable fluorescence polarization value. We also studied the dependence of fluorescence polarization on the hLF concentration in the noncompetitive FPIA with FITC-anti-hLF5 nanobody. The detection limit for hLF was 2.1 ± 0.2 µg/ml and the linear range for determining the hLF concentration was 3-10 µg/ml. FPIA is commonly used to assay low-molecular-weight substances; however, the use of fluorescently labeled nanobodies allows quantification of high-molecular-weight proteins. Here, we demonstrated that FPIA with fluorescently labeled nanobodies can be used for hLF quantification in milk.

Comparison of four immunoassays to an HPLC method for the therapeutic drug monitoring of methotrexate: Influence of the hydroxylated metabolite levels and impact on clinical threshold.

OBJECTIVES: Methotrexate requires therapeutic drug monitoring in oncology because of narrow therapeutic index, especially the metabolite 7-hydroxymethotrexate exhibits nephrotoxicity. The goal of this study was to evaluate different assays and their impact on clinical decisions. METHODS: Following routine measurement with Abbott TDxFLx® assay (MTX-TDX), 62 samples were analysed on Architect®i1000 (MTX-ARCHI), Xpand® (ARK/XPND), Indiko® (ARK/INDI), and HPLC (MTX-HPLC) as the reference method. The influence of 7-hydroxymethotrexate was explored on ARK reagent to document the cause of the observed bias. ROC curves were built to study the impact of the method on the discharge thresholds for the patients at three levels. RESULTS: Total imprecision was below 2.60% for the methotrexate-ARCHI and close to 10% for both ARK assays for plasma pools. The correlation coefficients were 0.93, 0.93, 0.89 and 0.95, the Bland-Altman difference plot revealed a bias of 0.075, 0.037, 0.049 and -0.002, and the number of results exceeding the TE criteria of 0.1 µM was 17 (27%), 13 (21%), 15 (24%) and 15 (24%) for MTX-TDX, ARK/INDI, ARK/XPND and MTX-ARCHI, respectively. Cross reactivity with 7-hydroxymethotrexate was between 1 and 9%. Overestimation of methotrexate concentration was between -4% and +32%. The most robust clinical level was found to be the highest level (0.2 µM) with ROC curves. CONCLUSIONS: The authors found the best results for imprecision with chemiluminescent microparticle immunoassay method on methotrexate-ARCHI, with bias below to the RICOS recommendations and best correlation to the reference method. Impact on the threshold values for clinical decision need to be clearly exposed to clinicians.

Comparison of Different Laboratory Methods for Clinical Detection of Brucella Infection.

The rapidity, accuracy, and detection abilities of different laboratory methods (tube agglutination test (SAT), indirect ELISA, fluorescence polarization test (FPA), and blood culture methods) to detect Brucella in the laboratory. The study included 95 patients with documented and 42 patients with suspected brucellosis and 56 healthy control subjects. For the tests, the positive rates of Brucella infection detection in the confirmed group were significantly higher than in group with suspected infection (p<0.01) and in healthy controls (p<0.01). There was no significant difference between indirect ELISA and FPA in detecting antibodies to Brucella in acute (χ2=0.335), subacute (χ2=0.660), and chronic cases (χ2=5.332). Among the detection methods, indirect ELISA showed the highest sensitivity (98.9%), specificity (100%), and Youden index (0.989). The sensitivity and specificity of FPA were 96.8 and 96.4%, respectively. In order to easily and rapidly diagnose brucellosis in clinical practice, a combination of detection methods is recommended, in which Brucella antibodies are screened by FPA and then confirmed by indirect ELISA.

Synthesis and characterization of tracers and development of a fluorescence polarization immunoassay for amantadine with high sensitivity in chicken.

Fluorescence polarization immunoassay (FPIA) is a homogeneous and rapid analytical method that is suitable for high-throughput screening of large numbers of samples. However, FPIA typically suffers from lower sensitivity than the well-established enzyme-linked immunosorbent assay (ELISA), limiting its wide application as an analytical tool that can be run with trace levels of an analyte. Herein, a highly sensitive FPIA for detecting amantadine (AMD) in chicken is described. To achieve high sensitivity, nine chemical tracers of AMD that employ different fluoresceins, fluorescein derivatives, and haptens were synthesized and paired with four previously produced monoclonal antibodies (mAbs). The effect of the tracer structure on the sensitivity of FPIA was investigated and discussed. We found that the tracers with a linear and shorter bridge between adamantane and fluorescein generally provided higher sensitivity. After optimization, N'-(1-adamantyl) ethylenediamine (AEDA), an AMD structural analogue labeled with fluorescein isothiocyanate (FITC), achieved the lowest IC50 value (1.0 ng/ml) in the FPIA, which was comparable to that of the heterologous ELISA format that used the same mAb7G2. We also investigated the possible recognition mechanism of mAbs in terms of conformational and electronic aspects. The developed FPIA was applied to chicken to detect AMD residue, demonstrating a limit of detection (LOD) of 0.9 µg/kg with recoveries of 76.5-89.3% and coefficients of variation (CVs) below 14.5%. These results show that the proposed FPIA is an efficient, accurate, and convenient method for the rapid screening of AMD residues in chicken. PRACTICAL APPLICATION: The fluorescence polarization immunoassay (FPIA) was developed to determine and quantify amantadine (AMD) in chicken samples with high sensitivity. This homogeneous method avoids coating and washing steps and may provide high-throughput AMD screening in chicken in 10 min with high accuracy and precision. FPIA can be used as a monitoring tool and contribute significantly to the rapid detection of AMD in chicken.

Liquid chromatography-tandem mass spectrometry method for quantification of gentamicin and its individual congeners in serum and comparison results with two immunoanalytical methods (fluorescence polarization immunoassay and chemiluminiscent microparticle immunoassay).

BACKGROUND: Total gentamicin is a sum of five congeners C1, C1a, C2, C2a and minor C2b, which differ from each other in their methylation on the purpurosamine ring. Liquid chromatography with mass detection (LC-MS/MS) and specified calibration material enables the concentration of total gentamicin and its individual congeners to be analysed. METHODS: 50 µL serum was precipitated with acetonitrile in the presence of 0.5 mol/L formic acid. A RP BEH C18 1.7 µm 2.1x50 mm column maintained at 30 °C and tobramicin as the internal standard were used. Mass detection was performed in positive electrospray. The gentamicin results were compared with fluorescence polarization immunoassay (FPIA) and chemiluminiscent microparticle immunoassay (CMIA). Passing-Bablock regression analysis and Bland-Altman analysis were used. RESULTS: Calibration curves for individual gentamicin congeners were linear with correlation coefficients between 0.997 and 0.998. Recovery was 91.6-102.0% and the coefficients of variation 1.4-8.4%. The total gentamicin concentration was compared with immunoassay FPIA (LC-MSgen = 0.9798xPFIAgen) and CMIA (LC MSgen = 0.9835xCMIAgen) both with significant correlation (p < 0.001). CONCLUSION: The LC-MS/MS method is fast and precise and can be applied to routine TDM in patients. Comparing it to immunoassays makes it possible to measure concentration of gentamicin congeners, which may be important in the case of their different pharmacokinetics.

Fluorescence polarization immunoassay for rapid determination of dehydroepiandrosterone in human urine.

In this paper, five fluorescein-labeled dehydroepiandrosterone (DHEA) derivatives (tracers) with different chain lengths between the fluorescein and hapten were synthesized and featured so as to establish a fluorescence polarization immunoassay (FPIA) for DHEA detection in human urine samples with previously prepared polyclonal antibody against DHEA. The outcomes of the structure of tracer on FPIA sensitivity were investigated. Under the optimal condition, the fluorescence polarization value (FP) decreases linearly in DHEA concentration, ranging from 1.6 to 243.3 ng mL-1, with the limit of detection of 1.1 ng mL-1 and IC50 value of 25.1 ng mL-1. Moreover, the developed FPIA was time-saving as it could complete the detection within 3 min. FPIA and commercial enzyme-linked immunosorbent assay kit were both applied to analyze the spiked human urine samples with DHEA. Excellent recoveries (92.1-108.0%) and satisfactory correlation coefficient (R2 = 0.98) were acquired with the two methods, indicating that the developed FPIA was a fast and efficient screening immunoassay with accuracy and sensitivity for DHEA detection in human urine samples. Graphical abstract.

Facile and rapid detection of SARS-CoV-2 antibody based on a noncompetitive fluorescence polarization immunoassay in human serum samples.

Antibody detection methods for viral infections have received broad attention due to the COVID-19 pandemic. In addition, there remains an ever-increasing need to quantitatively evaluate the immune response to develop vaccines and treatments for COVID-19. Here, we report an analytical method for the rapid and quantitative detection of SARS-CoV-2 antibody in human serum by fluorescence polarization immunoassay (FPIA). A recombinant SARS-CoV-2 receptor binding domain (RBD) protein labeled with HiLyte Fluor 647 (F-RBD) was prepared and used for FPIA. When the anti-RBD antibody in human serum binds to F-RBD, the degree of polarization (P) increases by suppressing the rotational diffusion of F-RBD. The measurement procedure required only mixing a reagent containing F-RBD with serum sample and measuring the P value with a portable fluorescence polarization analyzer after 15 min incubation. We evaluated analytical performance of the developed FPIA system using 30 samples: 20 COVID-19 positive sera and 10 negative sera. The receiver operating characteristic curve drawn with the obtained results showed that this FPIA system had high accuracy for discriminating COVID-19 positive or negative serum (AUC = 0.965). The total measurement time was about 20 min, and the serum volume required for measurement was 0.25 µL. Therefore, we successfully developed the FPIA system that enables rapid and easy quantification of SARS-CoV-2 antibody. It is believed that our FPIA system will facilitate rapid on-site identification of infected persons and deepen understanding of the immune response to COVID-19.

Competitive and noncompetitive fluorescence polarization immunoassays for the detection of benzothiostrobin using FITC-labeled dendrimer-like peptides.

Peptides obtained from phage display libraries are valuable reagents for small-molecule immunoassays. However, their application in fluorescence polarization immunoassays (FPIAs) is limited by phage particles. Here, monomer, dendrimer-like dimer, tetramer peptidomimetic and anti-immunocomplex tracers were designed and synthesized using lysine as special scaffolds and spacers to develop competitive and noncompetitive FPIAs for benzothiostrobin. The affinity between tracers and monoclonal antibodies or immunocomplexes increased with the tracer valence. A higher signal-to-noise ratio and sensitivity could be generated in the FPIAs based on tetramer tracers. The sensitivities of competitive (50% inhibitory concentration) and noncompetitive (50% saturation concentration) FPIAs were 19.71 ± 4.65 and 40.43 ± 2.73 ng mL-1, respectively. The spiked recoveries were 78.3%-105.2% with relative standard deviations (RSDs) of 0.7%-15.4% for the competitive FPIA, while 78.7%-115.3% with RSDs of 0.7%-12.5% for the noncompetitive FPIA. The amounts of benzothiostrobin in rice detected by the FPIAs were consistent with those detected by high performance liquid chromatography.